User Manual
Integration procedure
Remove QUBIK from Dev tray
Note
Secure with a Kapton tape the kill switches on base plate.
Weight QUBIK
Insert QUBIK to RBF tray and secure it in place with the securing pin
Prepare the antennas as in QUBIK assembly guide
Connect COMMS programming device to umbilical and provide 3.3V power to umbilical in order to activate COMMS board
Reset COMMS parameters as described in Parameter storage reset procedure
Disconnect umbilical
Transfer to deployer
Remove securing pin
Slide QUBIK until base plate protrudes 5mm from RBF tray
Insert protruding base plate to deployer keeping RBF tray in contact with the deployer
Slide QUBIK into the deployer
Material List
Metals
PART NAME |
FILE NAME |
QTY |
MASS per unit (gr) |
MASS TOTAL (gr) |
MATERIAL |
SURFACE COATING |
---|---|---|---|---|---|---|
Top Plate |
solar-power-board-top-mount.FCStd |
1 |
10 |
10 |
AL6061 |
Anodized |
Screw M2.5L60 DIN965 |
screw-M2_5-L60-DIN965.FCStd |
4 |
1.7 |
6.8 |
Stainless Steel |
N/A |
Bottom Plate |
plate.FCStd |
1 |
9 |
9 |
AL6061 |
Anodized |
Screw M2L6 DIN7985 |
screw-M2-L6-DIN7985.FCStd |
4 |
(Included in Sub-Assemblies) |
(Included in Sub-Assemblies) |
Stainless Steel |
N/A |
Antenna |
antenna.FCStd |
1 |
(Included in Base Plate PCB) |
(Included in Base Plate PCB) |
Steel |
Electrostatic Paint |
Nut M2.5 DIN934 |
nut-M2_5-DIN934.FCStd |
4 |
(Included in Sub-Assemblies) |
(Included in Sub-Assemblies) |
Stainless Steel |
N/A |
Screw M2L10DIN7985 |
screw-M2-L10-DIN7985.FCStd |
8 |
(Included in Sub-Assemblies) |
(Included in Sub-Assemblies) |
Stainless Steel |
N/A |
Nut M2DIN934 |
nut-M2-DIN934.FCStd |
8 |
(Included in Sub-Assemblies) |
(Included in Sub-Assemblies) |
Stainless Steel |
N/A |
PQ9ish-Bus Spacer |
pq9-spacer.FCStd |
12 |
0.4 |
5 |
AL6061 |
Anodized |
Dummy Mass |
assembly-dummy-mass.FCStd |
1 |
45 |
45 |
Bronze |
N/A |
Sony NP-BX1 Battery |
NP-BX1.FCStd |
2 |
24.9 |
49.8 |
Lithium |
N/A |
PQ9ish-Bus Battery Spacer |
pq9-battery-spacer.FCStd |
4 |
1 |
4 |
AL6061 |
Anodized |
M2x0.45x1D HELICOIL insert |
N/A |
4 |
(Included in Sub-Assemblies) |
(Included in Sub-Assemblies) |
Stainless Steel |
Dry Film Lubricant |
M2.5x0.45x1.5D HELICOIL insert |
N/A |
4 |
(Included in Sub-Assemblies) |
(Included in Sub-Assemblies) |
Stainless Steel |
Dry Film Lubricant |
Non-Metals
PART NAME |
FILE NAME |
QTY |
MASS per unit (gr) |
MASS TOTAL (gr) |
MATERIAL |
SURFACE COATING |
---|---|---|---|---|---|---|
Side Solar Panel |
assembly-solar-power-board.FCStd |
4 |
7 |
28 |
PCB |
422B - Modified Conformal Coating |
Top Solar Panel |
assembly-solar-power-board-top.FCStd |
1 |
11 |
11 |
PCB |
422B - Modified Conformal Coating |
Solar Cell |
SM141K04LV.FCStd |
15 |
2.3 |
35 |
Monocrystalline Silicone solar cell |
N/A |
Base Plate PCB |
assembly-base-plate.FCStd |
1 |
28 |
28 |
PCB |
422B - Silicone Modified Conformal Coating |
Antenna Mount |
antenna-mount.FCStd |
2 |
(Included in Base Plate PCB) |
(Included in Base Plate PCB) |
Teflon |
N/A |
Antenna Cable Mount |
antenna-cable-mount.FCStd |
1 |
(Included in Base Plate PCB) |
(Included in Base Plate PCB) |
Nylon |
N/A |
Antenna Cable |
N/A |
1 |
(Included in Base Plate PCB) |
(Included in Base Plate PCB) |
Dyneema(0.14mm) |
N/A |
Nut M3 Nylon |
nut-M3-nylon.FCStd |
1 |
(Included in Base Plate PCB) |
(Included in Base Plate PCB) |
Nylon |
N/A |
Slotted Screw M3L6 Nylon |
screw-M3-L6-nylon-slotted.FCStd |
1 |
(Included in Base Plate PCB) |
(Included in Base Plate PCB) |
Nylon |
N/A |
PQ9ish COMMS |
pq9-comms.FCStd |
1 |
10 |
10 |
PCB |
422B - Silicone Modified Conformal Coating |
PQ9ish EPS |
pq9-eps.FCStd |
1 |
15 |
15 |
PCB |
422B - Silicone Modified Conformal Coating |
Power and Signals Harness, 5853 BL005 Alpha Wire |
N/A |
1 |
(Included in Sub-Assemblies) |
(Included in Sub-Assemblies) |
PTFE |
N/A |
RF Harness, 83284 009100 Belden Wire & Cable |
N/A |
1 |
(Included in Sub-Assemblies) |
(Included in Sub-Assemblies) |
Fluorinated Ethylene Propylene (FEP) |
N/A |
Cable tie, 111-006659 Hellermann Tyton |
N/A |
4 |
(Included in Sub-Assemblies) |
(Included in Sub-Assemblies) |
E/TFE |
N/A |
Adhesives
PART NAME |
FILE NAME |
QTY |
MASS per unit (gr) |
MASS TOTAL (gr) |
MATERIAL |
SURFACE COATING |
---|---|---|---|---|---|---|
Loctite 9497 |
N/A |
1 |
N/A |
N/A |
Epoxy Adhesive |
N/D |
Loctite 9466 |
N/A |
1 |
N/A |
N/A |
Epoxy Adhesive |
N/D |
MG Chemicals 8331 |
N/A |
1 |
N/A |
N/A |
Silver Conductive Epoxy Adhesive |
N/D |
Kapton Tape, 3M 1218 |
N/A |
1 |
N/A |
N/A |
Polyimide Film Tape with Acrylic Pressure-Sensitive Adhesive |
N/D |
Loctite 243 |
N/A |
1 |
N/A |
N/A |
Acrylic |
N/D |
MG Chemicals |
SILICONE CONFORMAL COATING SPRAY |